2/f block a, 94 t okwawan road, kowloon, hong kong t el: (852) 2765 3888 fax: (852) 2954 3304 revised in 06/07 1 e & e magnetic products limited 1000 base-t applications single port, through hole, t ab down zigzag output pins pattern (8 cores designs) magnetic integrated connector modules 1500vrms isolation voltage per ieee802.3 compliant with ieee802.3 standard including 350 m h ocl with 8ma dc bias enhanced performance on emi suppression with metal shield oo operating temperature 0 c to +70 c rohs compliant versions are available ul 1863 listed support 4 pairs fo category 5 utp cable with 1000base-t full duplex applications mj116(05) g eneral e lectrical s pecification @ 25 c insertion loss (db max) return loss (db min) cmrr (db min) 0.1-100mhz crosstalk (db min) hipot (vrms) 0.5-40mhz 40-100mhz 0.1-100mhz 0.1-100mhz 1.0 1.2 18.0 12-20log(f/80) 32.0 33-20log(f/50) 1500 100-125mhz 1 1 p art n umber t able part number 1ct:1ct 1ct:1ct 1ct:1ct 1ct:1ct 1ct:1ct rohs part number led (left / right) configuration mechanical package schematic mj11d-04a tc tc tc tc tc g / y g / y g / y g / y g / y mj11d-04a mj11d-04a mj11d-04b mj11d-04b 2 4 turn ratio ( 3%) (chip : cable) 1ct:1ct tc g / y mj11d-04b 3 1ct:1ct tc ? mj11d-04c tc mj11d-04c 1. ?f? represents the test frequency specified in mhz. notes: 2. for different electrical and mechanical specifications, please contact e&e magnetic products limited. 3. core location are counted from pcb (chip) side to cable (media) side, where: "t" = isolation transformer ; "c" = common-mode choke . e&e magnetic products limited. 5. panel tabs are optional. 6. all parts shown in this datasheet have gold plating thickness of 10 micro-inch (min.) over cont act area. advance options including 30 micro-inch (min.) and 50 micro-inch (min.) are also available. 4. leds (left / right) : "g" = green ; "y" = y ellow ; "?" = none. for different led color requirements, please contact 1ct:1ct 1ct:1ct mj-11d2gy a0-g100 mj-11d2gy a0-g101 mj-11d2gy a0-g114 mj-11d2gy a1-g100 mj-11d2gy a1-g101 mj-11d2gy a1-g114 MJ-11D2NNA0-G100 mj-11d2nna0-g101 mj-11d2nna0-g1 14 tc mj11d-04c g100 g101 g114 g100 g101 g114 g100 g101 g114 mjr11d2gy a0-g100 mjr11d2gy a0-g101 mjr11d2gy a0-g114 mjr11d2gy a1-g100 mjr11d2gy a1-g101 mjr11d2gy a1-g114 mjr11d2nna0-g100 mjr11d2nna0-g101 mjr11d2nna0-g1 14 ? ? ?
2 m echanical d imensions mj11d-04a e & e magnetic products limited revised in 06/07 2/f block a, 94 t okwawan road, kowloon, hong kong t el: (852) 2765 3888 fax: (852) 2954 3304 all dimensions are specified in with higher precedence in inch. unless otherwise specified, all tolerances are . inch mm 0.010 0.25 mj11d-04b c h ip s id e c a b le s id e reference or gauge plane note 5 mj116(05) l e d ( l e f t ) l e d ( r ig h t ) 0 .4 5 0 1 1 .4 3 0 .6 2 0 1 5 .7 5 0 .4 5 0 1 1 .4 3 0 .1 0 0 2 .5 4 0 .0 5 0 1 .2 7 0 .1 2 0 3 .0 5 0 .0 8 5 2 .1 6 0 .1 0 0 2 .5 4 0 .2 5 0 6 .3 5 2 4 6 8 1 3 7 5 1 0 9 11 1 2 1 3 1 4 0 .5 2 2 1 3 .2 6 0 .3 2 2 8 .1 8 0 .1 6 0 4 .0 6 0 .0 6 2 1 .5 7 d ia : 2 x 0 .1 2 6 3 .2 0 d ia : 2 x 0 .0 3 5 0 .8 9 d ia : 1 0 x 0 .0 4 2 1 .0 7 d ia : 4 x 0 .8 5 5 2 1 .7 2 0 .4 2 5 1 0 .8 0 0 .1 2 5 3 .1 8 m a x . 0 .5 5 5 1 4 .1 0 0 .6 4 0 1 6 .2 6 j 1 j 8 m a x . m a x . (e & e p /n ) (d a t e ) uu rr r c us recommended hole pattern viewed from component side 0 .0 4 2 1 .0 7 d ia : 4 x 0 .4 5 0 1 1 .4 3 0 .6 2 0 1 5 .7 5 0 .4 5 0 1 1 .4 3 0 .1 0 0 2 .5 4 0 .0 5 0 1 .2 7 0 .1 2 0 3 .0 5 0 .0 8 5 2 .1 6 0 .1 0 0 2 .5 4 0 .2 5 0 6 .3 5 2 4 6 8 1 3 7 5 1 0 9 0 .0 6 2 1 .5 7 d ia : 2 x 0 .1 2 6 3 .2 0 d ia : 2 x 0 .0 3 5 0 .8 9 d ia : 1 0 x 0 .5 5 5 1 4 .1 0 j1 j8 0 .6 4 0 1 6 .2 6 m a x . m a x . 11 1 2 1 3 1 4 0 .1 3 3 3 .3 8 0 .1 9 3 4 .9 0 0 .2 9 8 7 .5 7 0 .4 9 8 1 2 .6 5 0 .1 2 5 3 .1 8 0 .4 2 5 1 0 .8 0 0 .8 5 5 2 1 .7 2 m a x . l e d ( l e f t ) l e d ( r ig h t ) (e & e p /n ) (d a t e ) uu rr r c us recommended hole pattern viewed from component side reference or gauge plane c h ip s id e c a b le s id e note 5 1000 base-t applications single port, through hole, t ab down zigzag output pins pattern (8 cores designs)
3 m echanical d imensions mj11d-04c e & e magnetic products limited revised in 06/07 2/f block a, 94 t okwawan road, kowloon, hong kong t el: (852) 2765 3888 fax: (852) 2954 3304 c h ip s id e c a b le s id e reference or gauge plane note 5 mj116(05) 0 .4 5 0 1 1 .4 3 0 .6 2 0 1 5 .7 5 0 .4 5 0 1 1 .4 3 0 .1 0 0 2 .5 4 0 .0 5 0 1 .2 7 0 .1 2 0 3 .0 5 0 .0 8 5 2 .1 6 0 .1 0 0 2 .5 4 0 .2 5 0 6 .3 5 2 4 6 8 1 3 7 5 1 0 9 0 .0 6 2 1 .5 7 d ia : 2 x 0 .1 2 6 3 .2 0 d ia : 2 x 0 .0 3 5 0 .8 9 d ia : 1 0 x 0 .8 5 5 2 1 .7 2 0 .4 2 5 1 0 .8 0 0 .1 2 5 3 .1 8 m a x . 0 .5 5 5 1 4 .1 0 0 .6 4 0 1 6 .2 6 j 1 j 8 m a x . m a x . (e & e p /n ) (d a t e ) uu rr r c us recommended hole pattern viewed from component side all dimensions are specified in with higher precedence in inch. unless otherwise specified, all tolerances are . inch mm 0.010 0.25 m aterials housing pcb pins contact pins consist of thermoset & thermoplastic materials, all of them are ul 94-v0 rated. copper wire which meets solderability requirements per mil-std-202, method 208. phosphor bronze, plated with nickel under-plating and hard gold over contact area. 6 1000 base-t applications single port, through hole, t ab down zigzag output pins pattern (8 cores designs)
4 g100 e & e magnetic products limited revised in 06/07 2/f block a, 94 t okwawan road, kowloon, hong kong t el: (852) 2765 3888 fax: (852) 2954 3304 g101 g114 mj116(05) j7 shiel d 1000pf /2000v 75 w rj -4 5 ca bl e s id e 1c t :1c t j8 j2 j1 j3 j5 j4 j6 75 w 1c t :1c t 75 w 1c t :1c t 75 w 1c t :1c t rj -4 5 ch ip si de 2 3 4 8 9 10 m d i_ 3 - m d i_ 2 + m d i_ 1 + m d i_ 1 - m d i_ 0 - m d i_ 3 + 5 6 7 m d i_ 2 - 1 m d i_ 0 + se co nd ar y pr im ar y s chematics 1000 base-t applications single port, through hole, t ab down zigzag output pins pattern (8 cores designs) j7 sh ie ld 100 0pf /20 00v rj- 45 cab le s ide rj- 45 chip sid e 1c t :1 c t j8 j2 j1 j3 j5 j4 j6 1c t :1 c t 75 w 1c t :1 c t 1c t :1 c t 9 10 7 3 2 1 m d i_ 0 - m d i_ 1 + m d i_ 3 + m d i_ 3 - m d i_ 0 + 6 5 4 m d i_ 1 - m d i_ 2 + m d i_ 2 - 8 75 w 75 w 75 w prim ary sec ond ary j1 j2 j3 j4 j5 j6 j7 j8 1 2 3 4 5 6 7 8 9 10 shield m d i_ 0 - m d i_ 2 + m d i_ 1 - m d i_ 3 - m d i_ 0 + m d i_ 1 + m d i_ 2 - m d i_ 3 + 0.1uf 1000pf/2000v 1ct :1ct 75 w r j- 45 c hi p s id e 1ct :1ct 1ct :1ct 1ct :1ct 0.1uf 0.1uf 0.1uf 75 w 75 w 75 w primary rj- 45 cab le s ide sec ond ary
e & e magnetic products limited 5 revised in 06/07 2/f block a, 94 t okwawan road, kowloon, hong kong t el: (852) 2765 3888 fax: (852) 2954 3304 for more information, please cont act headquarter 2/f block a, merit industrial centre,94 t okwawan road, kowloon, hong kongtel: (852) 2765 3888 fax: (852) 2954 3304 email: eempl@eleceltek.com website: http://www.eleceltek.com information herein is for reference only and subject to change without notice. it does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. all logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. the company does not assume any liability arising out of the application or use of any product or circuit described herein. copyrights 2006, e & e magnetic products limited. led s c olor a nd p olarity led (right) led (left) mj11d-04a led (left) led (right) color color polarity polarity pin 11 pin 12 pin 13 pin 14 green yellow 13 14 11 12 led s pecification @25 f orward c urrent = 20ma c, standard color typical wavelength (nm) forward voltage (volt) green yellow 565 590 2.2 2.1 2.5 2.5 typical maximum led s c olor a nd p olarity led (right) led (left) mj11d-04b led (left) led (right) color color polarity polarity pin 11 pin 12 pin 14 pin 13 green yellow 1 1 1 2 1 3 1 4 mj116(05) 1000 base-t applications single port, through hole, t ab down zigzag output pins pattern (8 cores designs)
|
